dr Nikola Šibalić
vanredni profesor | Mašinski fakultet Rođen sam 28. decembra 1975. godine u Žabljaku, Republika Crna Gora. Osnovnu i srednju školu završio sam u Žabljaku, smjer prirodno-matematički. Poslije završene srednje škole 1994. godine upisao sam Mašinski fakultet u Podgorici na Univerzitetu Crne Gore. Diplomirao sam na smjeru Proizvodno mašinstvo. Diplomski rad pod nazivom „Modeliranje zapreminskog oblikovanja metala u otvorenim kalupima primjenom metode konačnih elemenata” odbranio sam 2002. godine. Nakon diplomiranja upisao sam poslijediplomske...
Nastava
| Jedinica | Program | Tip | Sem. | Predmet | P x GP | V x GV | L x GL |
|---|---|---|---|---|---|---|---|
| MF | MAŠINSTVO | 6 | OBRADA REZANJEM | 3 x 1 | 0 x 0 | 0 x 0 | |
| MF | MAŠINSTVO | 6 | ALATI I PRIBORI | 2 x 1 | 0 x 0 | 0 x 0 | |
| MF | MAŠINSTVO | 1 | CAD/CAM/CAE | 2 x 0 | 2 x 0 | 0 x 0 | |
| MF | MEHATRONIKA | 5 | SENZORI , MJERENJE I OBRADA SIGNALA | 2 x 1 | 0 x 0 | 0 x 0 | |
| MF | MAŠINSTVO | 1 | RAČUNARSKI ALATI | 3 x 1 | 0 x 0 | 0 x 0 | |
| MF | MAŠINSTVO | 4 | TEHNOLOGIJA MAŠINSKE OBRADE | 3 x 1 | 0 x 0 | 2 x 1 | |
| MF | MEHATRONIKA | 6 | TEHNOLOGIJA MAŠINSKE OBRADE | 3 x 1 | 1 x 1 | 1 x 1 | |
| MF | MAŠINSTVO | 6 | CAD/CAM SISTEMI | 2 x 1 | 0 x 0 | 0 x 0 | |
| MF | MAŠINSTVO | 3 | CNC MAŠINE | 2 x 1 | 0 x 0 | 0 x 0 | |
| MF | MEHATRONIKA | 3 | CNC MAŠINE | 2 x 0 | 0 x 0 | 0 x 0 | |
| MF | MAŠINSTVO | 3 | CIM SISTEMI | 2 x 1 | 0 x 0 | 0 x 0 | |
| MF | MEHATRONIKA | 1 | SENZORI,MJERENJA I OBRADA SIGNALA | 1.5 x 1 | .5 x 1 | .5 x 1 | |
| MF | MEHATRONIKA | 6 | CNC MAŠINE | 3 x 1 | 0 x 0 | 0 x 0 |
Izabrane publikacije
| Godina | Kategorija | Autori | Naslov | Izvor |
|---|---|---|---|---|
| 2023 | SCOPUS | Mumović, M., Šibalić, N., Vujović, A., Jovanović, J. | Topological optimization of vice jaws model for pipe clamping | Journal of Physics: Conference Series |
| 2022 | SCOPUS | Šibalić, N., Mumović, M. | Information Measurement System for Determination of Cutting Force at Turning Technology | Lecture Notes in Networks and Systems |
| 2021 | SCOPUS | Marko Mumović, Nikola Šibalić, Darko Bajić, Milan Vukčević | NUMERICAL ANALYSIS OF WELDING SEQUENCE INFLUENCING THE QUALITY OF AN AA6060-T4 ALLOY LAP JOINT | STRUCTURAL INTEGRITY AND LIFE |
| 2019 | SCI, SCIE, SSCI, A&HCI | Nikola Šibalić, Milan Vukčević | Numerical Simulation for FSW Process at Welding Aluminium Alloy AA6082-T6 | Metals |
| 2019 | SCI, SCIE, SSCI, A&HCI | Nikola Šibalić, Milan Vukčević | RESEARCH ON THE QUALITY OF THE WELDED JOINT OF ALUMINIUM ALLOY SHEET AA6082-T6 USING FSW, MIG AND TIG METHODS | Materials and technology |
| 2017 | SCI, SCIE, SSCI, A&HCI | Mileta Janjić, Milan Vukčević, Nikola Šibalić, Sreten Savićević | LOAD DETERMINATION BY ANALYSING THE STRESS STATE FOR THE OPEN-DIE FORGING OF THE ALUMINIUM ALLOY AlMgSi0.5 | Materials and Technology |
| 2016 | SCI, SCIE, SSCI, A&HCI | Mileta Janjić, Milan Vukčević, Zoran Jurković, Nikola Šibalić, Sreten Savićević | Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AlMgSi0,5 | Metalurgija |
| 2016 | SCI, SCIE, SSCI, A&HCI | Šibalić N., Vukčević M., Janjić M., Savićević S. | A study on friction stir welding of AlSi1MgMn aluminium alloy plates | Technical gazette |
| 2016 | SCOPUS | Nikola Sibalic, Milan Vukcevic | Friction Stir Welding of Copper Alloy CuETP | Key Engineering Materials |
| 2012 | SCI, SCIE, SSCI, A&HCI | Janjić M., Vukčević M., Mandić V., Pavletić D., Šibalić N. | Microstructural Evolution During Friction Stir Welding of AlSi1MgMn Alloy | Metallurgy |
| 2012 | SCI, SCIE, SSCI, A&HCI | Vukčević M., Plančak M., Savićević S., Janjić M., Šibalić N. | Experimental Research and Numerical Simulation of Friction Stir Welding Process of 6082-T6 Aluminium Alloys | Steel Research International |
| 2010 | SCI, SCIE, SSCI, A&HCI | Vukčević M., Janjić M., Plančak M., Šibalić N. | Optimization of Friction Stir Welding Parametres on Aluminium Alloys AlSi1MgMn | Steel Research International |